News item image

A buddy sent his wife’s 928 over from some maintenance.  We are going to go through the front of the motor, the cooling system, and the fuel system.  The car already has a beautiful paint job from Travis at TC Concepts in Topeka.  We will get the mechanical stuff knocked out, then the interior. First thing to do was to pull the injectors so we could send them out to witchhunter for a cleaning.  I immediately noticed all the electrical …

Read more »

997TT Continued

porschedoc Uncategorized No Comments
News item image

997TT Continued

News item image

Got the motons installed and the wevo semi solid mounts in.  Still need to fine tune the ride height and such, but the main install is done. Old mounts stuck waaaay down there. Wevos next to the OEM mount. You can get one side out without disassembling anything, but the other side isn’t coming out, so start pulling stuff out of the way. Going after the front suspension. Front coilover assembled.  There are a couple of modifications and errors in …

Read more »

News item image

Had a friend bring in his Boxster yesterday because he was having a starting issue.  After some basic tests, I felt the first step of action was to replace the battery.  We did that, but it didn’t solve the problem….but…..it triggered a few more symptoms which pointed to a bad alternator.  Before we did the battery, the battery light was not coming on which usually triggered when the alternator goes south.  After we did the battery, the battery light came …

Read more »

News item image

Getting ready to install a T-equipment rollbar, harnesses, and GT3 seats into a……GT3.  Basic oil change and brake fluid flush will be included as well.  Stay tuned, I am waiting for some mounting hardware for the rollbar.

News item image

Got a call Sunday afternoon about a Boxster that had overheated and needed to get back on the road.  We had the car towed in and I started tearing into it.  This was a car with about 80k miles on it, which had not had it’s major services done……ever from what I can tell.   Unfortunately, a $40 drive belt caused about $1,100 in damage.  Basically what happened, is the drive belt broke, and the owner kept driving the car even …

Read more »

News item image

Finished up the RMS and Diff bearings a few nights ago.  Still need to knock out a wheel bearing on the right side and it should be ready to go.  I think the output shaft having play caused additional stress on the cv axle and bearing on that side as well due to the slight wobble the shaft must have had. New bearings installed, diff in place, and gearbox assembled. Outer diff cover installed. Selector shaft installed. Ahhh much better, …

Read more »

News item image

If you have a shifter that feels really sloppy in your 944, it is probably because the shift pin is worn out.  Generally this is an easy fix, pop in a new shift lever and usually it takes care of it.  On occasion though, the actual shift rod will wallow out, which is a little bigger issue. I have been doing some maintenance to the dragon to get it ready to sell, and one thing I have always had was …

Read more »

996TT Headers

News item image

A buddy of mine came across a used set of aftermarket headers for cheap, so we decided to slap them on the other day.  Pretty easy job, but it takes a couple of “just the right size” wrenches to get it done. New (used) higher flow headers. Old headers. Pooof! New ones installed.

News item image

This little boxster came in for it’s yearly service and brake job.  It was time for pads and rotors all the way around.  Unfortunately, the picking crew pulled the incorrect front rotors, so I am waiting on the correct ones which will be here on monday.  Actually they weren’t rotors at all, but mislabled CV boots, lol.  Oh well, it happens.  70k+ miles is usually pushing the pads and rotors.  After that it was an oil change with some fresh …

Read more »