Must be brake week here at the shop. Knocked out the front and rear brake pads on a turbo S today which had triggered a brake pad light. Pretty straight forward, but a lot easier with a few special tools. In position and ready to go up. God my floors really do look like crap. We have to remedy that. I know, everyone sees a Turbo S Cayenne, I see crappy floor finish. Just to give you an idea of …
After Tim was busted with brake parts in his oven, it was a few days before he was allowed out of the house, so the car patiently awaited it’s shiny new parts. The other day he swung by to knock out some work on our computer system and it gave me the opportunity to reinstall the parts with new pads. Some newly painted hats and calipers. Mmmm pretty. We are running EBC yellow brake pads which is a great HPDE …
Preventative maintenance on a track car, replacing the ball joints. This should be done annually if the car is driven steadily throughout the season. Up on the lift and ready to go. Old ball joint out of the arm And the new ball joint installed. Ready to rock.
Had this poor little Boxster come in with a broken top. These cars are known for weak convertible top transmissions and cables, and this one decided to let go with the top up…..right in the middle of the nice weather we are having here in KC no less. There are a couple failure modes on these transmissions. Sometimes you get lucky and just the cables let go, other times the transmissions lock up and take the cables with them. This …
Yesterday Wes tackled a quick job by installing an alternator in this Celica. Another daily driver done. No problem is too big or small for RennsportKC 🙂
Finished up the C4 today by installing new CV axle boots on both rear axles. A quick rebuild of the joints and some fresh grease, and this puppy is ready for the DE this weekend. Hanging the axles, ready to come out. Outer nut takes over 350ft/lbs of torque. And the assembly on my makeshift cardboard bench. And new axle boots installed on the first axle. Repeat on the 2nd and we were done.
This week we will tackle getting the Yokohama car ready for the upcoming HPDE. We have some leaking valve cover gaskets that we need to tackle, bleed the brakes, change out some torn axle boots, and it should be good for the weekend. Here you can see the oil has been dripping down onto the headers and burning off. Without the OEM heatshields/heat exchangers in place, we will likely have to do more valve cover gasket work annually as they …
This highly modified GTR is owned by a friend of mine who has been having trouble keeping it running through the weekend at the track. Anytime you push a car to it’s limits in regards to power, reliability suffers if not properly maintained. We started a new program with this car to inspect after every track weekend, identify any obvious weaknesses and correct them. Hopefully this will help to ensure the car runs smoothly at the events. This car was …
Yup, we dabble in Mercedes work as well 😉 This one came through for a quick oil change and inspection going into the winter months. Pretty straight forward with no surprises. Some fresh mobil 1 and filter, a top off of all the fluids, and we sent this one on it’s way.
When we took over the new space, it seems an unfinished car came with the place which belongs to a local PCA member. We started looking around and scrounging up parts here and there that were laying around for it and decided to start putting it back together so he can have his car back! We put the front and rear windows in a few days ago using the string method, pretty standard really….. Wes setting the rear window into …